Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
STEP 6
Optional Attach Side Shelf Accessory on Either Side
NOTE: Side shelf Model CAD-SK can be installed with the head already on
the cart.
1. Screw shoulder bolts (2) into the bottom screws on the side of the
cart (Fig. 20 and 21). Tighten with 5/32 Allen wrench.
2. Slide left and right side shelf brackets over the shoulder bolt (Fig. 22)
and install top screw attaching the side shelf brackets onto the cart
(Fig. 23). Tighten with Phillips screwdriver.
3. Holding the side shelf, install 2 shoulder bolts into the slot and screw
into the side shelf tray (Fig. 24). Tighten with a 3/16 Allen wrench
(Fig. 25).
4. Place shelf in the up position and check for level.
If shelf is not level, adjust side shelf set screw. Set screws can be
adjusted using a 3/32 Allen wrench (Fig. 26). Turn the Allen wrench
clockwise to raise the shelf. Turn 1/4 turn and review to see if the
shelf is level. The set screws in the left and right bracket should be
adjusted equally to ensure the shelf sits level.
9
Fig. 24
Fig. 25
Fig. 26
INSTALLATION
SIDE SHELF ASSEMBLY INSTRUCTIONS (OPTIONAL)
Fig. 22
Fig. 23
Fig. 20
Fig. 21
SHOULDER BOLT
SCREW HOLES