Fisher & Paykel CAD-48 Outdoor Cart User Manual


 
12
4. Install the above tank/hose assembly in the cart, over the tank bracket and feed the sink drain hose through the
hole in the center divider (Fig. 33).
NOTE:
The drain hose at the bottom of the tank exits the hole in the back of the cart (Fig. 34).
5. Attach the 1/2” ball valve and fitting to the tank drain as shown in Fig. 35, and tighten the hose clamp.
Fig. 33
Fig. 34
Fig. 35
Fitting
1/2” Ball Valve
Hose Clamp
INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)