Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
L.P. GAS CYLINDER
Gas cylinders manufactured today have mechanisms to provide worry free
barbequing year round:
Q.C.C.1 or Type 1-Quick Connect Coupling Valve, ensure fast tank hook-ups
requiring only hand tightening. The redundant valve system inhibits the flow
of gas to the burner if the connection is not 100% correct.
O.P.D. or Overfill Protection Device prevents accidental gas leaks caused by
cylinder “over pressurization”, the leading cause of cylinder gas leaks. The
float in the tank will automatically stop filling at 80% capacity, leaving a 20%
area for the expansion of liquid. Without this safety feature, the relief valve may
open and discharge propane, creating a potential safety hazard. An O.P.D.
cylinder is easily distinguished by its triangular hand wheel valve. (Figure 3)
Look for the Gas Guardian symbol to
easily identify propane cylinders with
these safety features.
1. SPECIFICATIONS
Self-contained propane gas barbeque
systems are designed to be used only
with a 9.1 kg (20 lb) propane cylinder,
equipped with a Type 1 cylinder valve
and incorporating an overfill protection
device (O.P.D). This barbeque cannot
be connected to an existing #510 P.O.L.
type valve (ones with left-hand threads).
The cylinder for your gas barbeque
must be constructed and marked in
accordance with the specifications of
L.P. gas cylinders:
In Canada: The National Standards of Canada CAN/CSA-B339, Cylinders,
Spheres and Tubes for Transportation of Dangerous Goods; and Commission.
In the U.S.: U.S. Department of Transportation (D.O.T.)
DO NOT CONNECT TO A PROPANE GAS CYLINDER EXCEEDING THIS CAPACITY,
OR USE A CYLINDER WITH ANY OTHER TYPE OF VALVE CONNECTION DEVICE.
The Type 1 valve is recognizable by the large external thread on the outlet
part of the valve. Standard existing valves do not have these exterior threads.
TM
WARNING
If the above instructions are not followed exactly,
a fire causing death or serious injury may occur.
FILLING STOPS AT
80%
NEW OPD
HANDWHEEL
Fig. 3
O.P.D.
FLOAT
SAFETY:
• Always turn off the cylinder valve tightly when your barbeque is not in use.
• Handle tank valves with care.
• Never connect an unregulated L.P. gas cylinder to your barbeque.
• Never store a spare cylinder under or near your barbeque when in use.
• Never subject any cylinder to excessive heat or direct sunlight.
• Always keep your in-use cylinder securely fastened in an upright position.
• Do not insert any foreign objects into the valve outlet. You may damage
the back-check. A damaged back-check can be the source of a leak. Leaking
propane may result in explosion, fire, severe personal injury or death.
• Never fill the cylinder beyond 80% full.
Any attempt to connect a regulator, with other than the:
i) Mating Type 1 connector (recognized by the large black coupling nut) or
ii) Standard #510 P.O.L. fitting,
by use of adapters or any other means, could result in damage, fire or injury and
may negate the important safety features designed into the Type 1 system. The
connection of a #510 P.O.L. fitting will not provide the flow control or temperature
shut-off features built into the complete Type 1 system.
We strongly recommend use of a propane cylinder with Q.C.C.I and O.P.D.
safety features.
THE CYLINDER MUST ALSO BE EQUIPPED WITH:
a. A shut-off valve terminating in a proper cylinder valve outlet specified in
current standards:
• Canada: CAN/CGA - 1.6a - M98 - Outdoor Gas Grills - Amend.
• U.S.: ANSI Z 21.58a-1998 OUTDOOR COOKING APPLIANCES.
b. A listed overfilling protection device (O.P.D.).
c. A safety relief valve having direct communication with the vapor space of
the cylinder.
d. A collar to protect the tank shut off valve.
e. An arrangement for vapor withdrawal.
f. A bottom ring for securing to tank support assembly.
THE CYLINDER SHOULD NOT EXCEED 472 MM (18 1/2") IN HEIGHT AND 317
MM (12 1/2") IN DIAMETER.
4
ELECTRICAL CAUTION
• If any accessory installed on this barbeque requires an external electrical
power source, it must be electrically grounded in accordance with local
laws or in the absence of local laws, with the Canadian Electrical Code
CSA C22.1 or in the U.S., with the National Electrical Code ANSI-NFPA 70.
• The three-prong plug provides protection against shock hazard and should
be plugged directly into a properly grounded three-prong receptacle. Do
not cut or remove the grounding prong from this plug.
• To ensure continued protection against risk of electric shock, connect to
properly earthed outlets only.
• Ensure all electrical supply cords and fuel supply hoses are kept well away
from any heated surfaces.
CARING FOR YOUR EQUIPMENT
PROVIDING POWER TO YOUR BARBEQUE
To provide power to the barbecue, plug grounded electrical cord into
rear electrical box as shown. (Fig.15)
Plug electrical cord into properly grounded
GFI (Ground Fault Interrupt) receptacle. If
use of an extension cord is required, be
sure that it is a minimum 16 AWG,
3 wire well insulated cord, marked
for OUTDOOR USE ONLY and properly
grounded. (Fig.14)
CAUTION: To ensure continued protection against risk of
electric shock, connect to properly earthed outlets only.
Fig. 14