Desa DVF34P Outdoor Fireplace User Manual


 
34
106424
DIRECT-VENT FIREPLACE (NATURAL/PROPANE/LP)
DVF34, DVF34P
MANUAL BLOWER KIT
GA3700
Manual-variable control blower accessory for
the DVF Series fireplaces.
THERMOSTATICALLY-
CONTROLLED BLOWER KIT
DA3610TA
Provides better heat distribution. Blower
turns off and on automatically, as needed.
Complete installation and operation instruc-
tions included in this manual.
DUPLEX OUTLET KIT
GA3555 (Not Shown)
For recessed installation when accessory
blowers are used.
BRASS PERIMETER TRIM
KIT - GA6090 (Not Shown)
Optional three sided brass trim kit covers
unfinished edges around fireplace. Provides
a finished appearance with the class of brass.
BRASS LOUVER KIT
D6034 (Not Shown)
These louvers will give your fireplace an
elegant look and allows you to customize
your fireplace. They easily replace the stan-
dard black louvers by screwing into place.
DECORATIVE 2-PIECE
BRASS ACCENT TRIM
D5037 (Not Shown)
These strips have a magnetic backing which
makes installation and removal quick and
easy. They are designed to go at the top and
bottom of the glass door on DVFH units.
Note:
Remove the plastic film covering on
strips before installing on fireplace.
BRICK LINER
D8037A (Not Shown)
This brick liner adds a touch of style to your
direct-vent fireplace and comes with easy to
follow instructions for installation.
ON/OFF WALL MOUNT
SWITCH - GWMS2
(Not Shown)
For all models. Allows the heater to be
manually turned on and off.
RECEIVER AND HAND-HELD
REMOTE CONTROL KIT
GHRC SERIES
For all models. Allows the heater to be
turned on and off conveniently.
ACCESSORIES
Purchase these fireplace accessories from
your local dealer. If they can not supply
these accessories, call DESA International’s
Sales Department at 1-800-432-2382 for
information. You can also write to the ad-
dress listed on the back page of this manual.
CABINET MANTEL
GM101UC Series - Unfinished
GM106FC Series - Oak Finished
with Medium Stain
Shown with optional base and laminate
hearth and mantel trim accessories.
Dimensions (WxHxD): 56
3
/
4
" x 48
3
/
4
" x 22
3
/
4
"
IMPORTANT: The above mantel model
numbers must end with the letter "C" to
fit this fireplace.
HARDWOOD HEARTH BASE
G3001U Series - Unfinished
G3006F Series - Oak Finished
with Medium Stain
The hearth base creates a handsome riser for
the fireplace (cannot be used with corner
mantel).
Dimensions (WxHxD): 58" x 6
1
/
2
" x 28
9
/
16
"