Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
11
LP GAS CONVERSION KIT (not shown)
Par
t Number Description
9992-258 8350 Series Natural Gas to LP Conversion Kit
LP Cylinder Conversion — 8350 Series
IMPORTANT!
TO ENSURE PROPER GAS FLOW, BURNER
CONTROL VALVES MUST
BE “OFF” BEFORE
OPENING THE GAS CYLINDER VALVE.
WARNING: During assembly
of the grill and when attaching or
replacing the L.P. gas cylinder,
insure that the gas supply hose is
free of kinks and/or damage and
is at least 3 inches away from hot
surfaces such as the grill casting.
Fig. 7
LP Cylinder Installation
Fig. 6
1.
Set the LP Cylinder in the Cylinder Support location with the
outlet valve facing toward the right side of the grill (Fig. 6 and 7).
2.
Insert the TYPE 1 Nipple of the regulator into the cylinder’s Fuel
Valve Outlet as shown. Turn the regulator hand wheel clockwise
to tighten. No tools are needed. The hand wheel will come to a
complete stop when the connection is secure, and the gas will
not flow until a positive seal is achieved.
NOTE: This step applies to you only if you are converting your 8350 Series grill to use LP GAS. If you will
be using your grill with NATURAL GAS, this section does not apply to you. Please skip back to the
section titled “Natural Gas Installation - 8350 Series ”.
The 8350 Series grill is set up from the factory to use NATURAL GAS. If you want to use LP GAS, you
must purchase the LP GAS CONVERSION KIT (sold separately). Follow the installation instructions
provided with the LP GAS CONVERSION KIT.