Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Barbecue Grills
LTR50001038, Rev. C
Appendix
www.calamebbq.com
31
Using a wrench, remove the orice for the infrared b.
burner.
Apply pipe compound to the tting threads where c.
you will place the new orice.
Screw on the correct orice for your grill until it is d.
nger tight.
Tighten the orice with the wrench.e.
If you have dual infrared burners, repeat the f.
previous steps for the second burner.
Replace the back cover.g.
Replacetheinfraredburnerorices2.
Unscrew the back cover from the grill and lift it a.
up and under the grill hood.
You will need:
Either a 13mm or 10mm open end wrench•
One #50 orice (for single infrared burner)•
OR
Two #54 orices (for dual infrared burners)•
OR
One #52 orice (for single infrared burner)•
Pipe compound suitable for natural gas•
You will need:
7mm wrench, socket, or nut driver•
One or two 1.75mm orices (depending on •
your side burner)
Pipe compound suitable for natural gas•
Gas Conversion (continued)
Replacethesideburnerorices3.
Remove the grate, burner cap and burner a.
diffuser from the side burner.
Using a 7mm wrench, remove the orice for b.
the burner.
Apply a small amount of pipe compound to c.
the orice threads.
Screw in the orice until it is nger tight.d.
Tighten the orice with the 7mm wrench.e.
If you have dual side burners, repeat the f.
previous steps for the second burner.
Mark the rating plate4.
After conversion has been completed, mark the rating
plate as NG with an indelible marker.