Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Barbecue Grills
LTR50001038, Rev. C
Cleaning and Maintenance
www.calamebbq.com
22
grain until excess liquid is removed and the surface
shines. It should not be oily to the touch, however
some residue is acceptable.
Furniture polish, such as Old English, can be effective
for polishing stainless steel and protecting the
surface.
Cleaning the Interior of Your Grill
Thoroughly clean stains, food, and grime using 1.
a sponge or damp cloth with warm water and a
mild dish soap. Use Fantastik or Formula 409 to
remove heavier soil.
Thoroughly rinse all surfaces and dry them 2.
completely with a clean towel. Do not allow water
to accumulate and puddle on stainless steel.
Water from various sources such as garden hoses
contains iron which will give the appearance of
rusting on stainless steel. If allowed to stand for
long periods of time on stainless steel, it will cause
pitting.
The racks, ame tamers, and avor bars can all be 3.
removed for cleaning and are dishwasher safe.
Burners
Spiders and small insects occasionally inhabit or make
nests in the burner tubes, obstructing the gas ow.
Sometimes this results in a type of re in and around
the gas tubes called “ashback”. To reduce the risk of
ashback, this procedure should be followed at least
once a month or when your grill has not been used for
an extended period of time.
IMPORTANT: Prior to starting this procedure, turn OFF
all of the gas control knobs, shut off the fuel supply,
and disconnect the fuel line.
Caution
Do not use Instant Rust Out, WD-40,
or Sheila Shine near food or on food
preparation surfaces as it is a health
hazard. This includes the interior of the
grill, grill racks, stainless steel sinks, the
inside of cabinets, warming drawers, and
ovens.
Rust Removal
It is a common misconception that stainless steel does
not rust. It does not stain, corrode, or rust as easily
as ordinary steel (it stains less), but it is not stain-
proof. If not properly protected and maintained, it can
corrode, pit, and discolor.
Fire
Hazard
NEVER spray WD-40 or Sheila Shine
near an open ame! These products
are extremely ammable while in their
aerosol forms.
Important
Because salt will accelerate rust and
corrosion, grill or barbecue island
owners who live near the beach need to
be diligent in maintaining their stainless
steel hardware. You need to clean and
polish your stainless steel frequently,
apply a protectant, and ensure water
does not collect and puddle.
Caution
Although nitric acid (also called aqua
fortis) can be effective for rust removal, it
is a highly corrosive chemical. Because of
the potential for injury or damage to your
stainless steel, we do not recommend
using nitric acid.
There are two methods of rust removal we
recommend:
Rust removal with Instant Rust Out:1.
Spray exterior stainless steel surfaces with Instant
Rust Out. Let it stand for about 30 seconds, then wipe
with a clean cloth. Apply a second time if necessary.
Instant Rust Out will leave a white residue which can
be rinsed off with water. Wipe the grill dry with a clean
cloth and apply Sheila Shine or WD-40 as a surface
protectant.
Rust removal with WD-40 or Sheila Shine:2.
Spray exterior stainless steel surfaces with WD-40 or
Sheila Shine and wipe down with a dry cloth or paper
towel until surface is free of rust. If there is signicant
rust or corrosion, use a Scotch-Brite scrubber.
Both of these products will act as a surface protectant
and help resist smudges, stains, and rust.