Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Installation / Assembly
7
2009 Barbecue Islands
LTR2009103, Rev. A
www.calspas.com
Rock / Stone Application
Place the island sections together on the ground.1.
Make sure the ground where the barbecue is place is as level as 2.
possible for best alignment.
NOTE: If the ground is
not level, use shims to
level out the island sec-
tions. This needs to be
done before you place
the bolts.
Connect the speak-3.
ers, lights, and main
power cables before
sliding the sections
together.
Insert the bolts 4.
through the pre-
drilled holes from
the inside of the
barbecue island (to-
tal of four bolts on
each side). Tighten
all bolts using a
9/16” wrench.
Prepare mortar in a 5.
container.
Apply mortar to 6.
the gaps left open
between the island
assembly (front and
back).
Let it dry for 15 to 30 minutes and brush the area where the mortar 7.
mix was applied.
Prepare grout in a second container.8.