Cal Flame Barbecue Island Gas Grill User Manual


 
Installation / Assembly
5
2009 Barbecue Islands
LTR2009103, Rev. A
www.calspas.com
Unit Attachment
Place the island sections together on the ground. Make sure the 1.
ground where the barbecue is placed is as level as possible for best
alignment.
NOTE: If the ground is not
level, use shims to level out
the island sections. This needs
to be done before you intall
the bolts.
Connect the speakers, 2.
lights, and main power
cables before sliding the
sections together.
Insert the bolts through 3.
the pre-drilled holes from
the inside of the barbecue
island (total of four bolts
on each side).
Tighten all bolts using a 4.
9/16” wrench.
Barbecue Island Assembly