Brinkmann Series 6419 Gas Grill User Manual


 
CClleeaanniinngg SSttaaiinnlleessss SStteeeell CCooookkiinngg GGrriillllss::
Wash grills with a mild detergent and rinse with hot water before
initial use and as needed. DO NOT use a commercial oven cleaner. For stubborn food residue, use a
degreaser and fiber or brass cleaning brush.
CClleeaanniinngg PPoorrcceellaaiinn--FFiinniisshheedd CCaasstt--IIrroonn CCooookkiinngg GGrriillllss::
Wash grills with a mild detergent and rinse with hot
water before initial use and as needed. For stubborn food residue, use a degreaser and fiber or brass cleaning
brush. Dry immediately using a soft cloth or paper towels.
CClleeaanniinngg HHeeaatt DDiissttrriibbuuttiioonn PPllaattee::
Heat distribution plates should be cleaned whenever food or grease
drippings accumulate to reduce the chance of flare-ups. Wash heat distribution plates with a mild detergent
and rinse with hot water. Use a degreaser and fiber or brass cleaning brush to remove stubborn food residue.
Do not use a wire brush or metal scraper on porcelain-finished heat distribution plates, as they can scratch or
chip the porcelain finish and promote rusting.
CClleeaanniinngg tthhee GGrreeaassee TTrraayy aanndd//oorr GGrreeaassee CCuupp::
The grease tray and/or grease cup (some models) should be
inspected before each grill use to reduce the chance of fire. Remove grease (a plastic spatula works well) and
wash all parts with a mild soap or degreaser and warm water solution.
QQuueessttiioonn:: WWhhaat
t ccaauusseess ggrriillll ppaarrttss ttoo rruusstt aanndd wwhhaatt eeffffeecctt ddooeess iitt hhaavvee oonn tthhee ggrriillll mmaatteerriiaallss??
AAnnsswweerr::
Rusting is a natural oxidation process and may appear on cast-iron and steel parts. Rust will not
affect the short-term performance of your grill. However, weathering and extreme heat can cause a stainless
steel lid to turn a bronze color. This is discoloration, not rust, and is not considered a manufacturing defect.
QQuueessttiioon
n:: WWhhaatt ccaauusseess mmyy ssttaaiinnlleessss sstteeeell ggrriillll lliidd ttoo ddiissccoolloorr aanndd hhooww ddoo II cclleeaann mmyy ggrriillll lliidd??
AAnnsswweerr::
Smoke, weathering and high heat can cause a stainless steel grill lid to turn bronze in color. This is
not to be confused with rust and is not a product defect. Machine oils used in the manufacturing process of
stainless steel as well as cooking oils and a dirty grill lid can also encourage discoloration if the lid is not
cleaned prior to grill use. After your grill is assembled, remove the protective PVC film from your grill lid and
use a stainless steel cleaner and soft cloth to remove residual adhesive and oils from the inside and outside of
your grill lid. Never use abrasive cleaners or scrubbers. In addition to the initial cleaning, routine cleaning to
remove dirt, grease and oils will help discourage lid discoloration.
QQ
uueessttiioonn:: CCaann II ccoonnvveerrtt mmyy ggrriillll ffrroomm pprrooppaannee ggaass ttoo nnaattuurraall ggaass??
AAnnsswweerr::
Most gas grills are manufactured to exact specifications and are certified for either propane gas or
natural gas use only. However, some models can be converted safely with conversion kits available for specific
models. Contact Brinkmann Customer Service at 800-527-0717 to see if your grill can be converted.
QQuueessttiioonn:: WWhhyy ddooeess tthhee hhoos
see // rreegguullaattoorr aasssseemmbbllyy ssuupppplliieedd wwiitthh mmyy ggrriillll nnoott ffiitt tthhee oollddeerr LLPP ggaass ttaannkk IIvvee
uusseedd ffoorr yyeeaarrss??
AAnns
swweerr::
U.S. Government regulates gas appliances and LP gas tanks. When regulations were changed, the
LP gas tank fittings were updated to ensure compliance. If your LP gas tank does not fit the hose / regulator
supplied with your new grill, the tank is outdated and must be replaced. Note: Effective April 1, 2002, all LP gas
tanks sold must include an "OPD" overflow protection device. This internal device prevents the LP gas tank
from being overfilled. Tanks without an OPD valve cannot be refilled.
QQuueessttiioonn:: SSoommeettiimmeess II hheeaarr aa hhuummmmiinngg ssoouunndd ccoommiinngg ffrroomm mmyy ggaass rreegguullaattoorr.. SShhoouulldd II bbee ccoonncceerrn
needd??
AAnnsswweerr::
The humming sound is gas flowing through the regulator. A low volume of noise is normal and will not
interfere with the operation of your grill. If the humming noise is loud and excessive, you need to purge air from
the gas line or reset the regulator flow limiting device following the Regulator Resetting Procedure under
Connecting LP Cylinder and Hose/Regulator to Grill. This procedure should be done every time a new LP gas
tank is connected to your grill. For help, refer to your owner’s manual or call Brinkmann Customer Service at
800-527-0717.
FREQUENTLY ASKED QUESTIONS
19