Brinkmann Series 6419 Gas Grill User Manual


 
17
TTRROOUUBBLLEE SSHHOOOOTTIINNGG
PPrroobblleemm:: PPoossssiibbllee CCaauusseess::
1. Check LP cylinder fuel level.
2. Bad electrode spark.
Check to see if the grill will match light.
Electrode or collector may need adjustment.
3. Burner may not be properly seated.
4. Burner may be obstructed.
5. The cylinder valve may be closed.
6. Regulator is not properly seated on cylinder valve.
1. Burner holes may be obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care
and Maintenance.
2. Burner is improperly seated on control valve.
3. Gas connections may be loose.
Leak Check and tighten all connections.
1. Burner is obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care
and Maintenance.
1. Burner holes may be obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care
and Maintenance.
2. Grill is not sufficiently preheated.
3. Burner is improperly seated on control valve.
1. Flow control device has been activated in regulator.
See Regulator Resetting Procedure under
Connecting LP Cylinder and Hose/Regulator to Grill.
1. Excess grease build-up causing grease fires.
2. Damaged or faulty regulator.
Replace with factory authorized parts.
3. Cook on a lower temperature setting.
BBuurrnneerr wwiillll nnoott lliigghhtt
FFiirree aatt ccoonnttrrooll kknnoobb
YYeellllooww FFllaammeess aatt bbuurrnneerr
FFllaammee bblloowwss oouutt oonn ""LLOOWW""
BBuur
rnneerr ddooeess nnoott ggeett hhoott eennoouugghh
GGrriillll iiss TToooo HHoott