Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
13
Step 13 Model 6804
Side Burner Valve Assembly
NOTE: Side Burner Valve is already attached to the regulator hose.
A. Install the Side Burner Valve from underneath the LEFT Side Table. First insert the valve stem out through the hole
in the bezel and fascia on the front of the side table. Next, flex the tube of the burner down and insert the nozzle into
the opening in the burner tube.
B. Install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into the threaded Valve
bracket holes. Install the top bolt first by twisting the valve/bracket to align only the top holes. Do not tighten completely.
Next, twist the valve/bracket to align the bottom holes and install the second bolt. Tighten both.
Step 14 Model 6805
Side Burner Valve Connection
A.
Install the Side Burner Valve from underneath the LEFT Side Table. First
insert the valve stem out through the hole in the bezel and fascia on the front of the side table.
Next, install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into the threaded
Valve bracket holes.
B. Remove nut from the unattached end of the corrugated hose that is connected to the Side Burner valve. Place the
end of the hose through the hole in the Side Burner bracket. Replace the nut on the other side of the bracket.
C. Attach Thermocouple fitting to valve. Carefully align and insert end of sensor, extending from brass nut on copper
tubing, into threaded opening in side burner valve as shown below. Gently flex copper tubing to insure brass nut is
not cross-threaded. Tighten brass nut BY HAND FIRST, FINGER TIGHT. Finally, turn nut 1/4 turn more with sup-
plied wrench. DO NOT OVER TIGHTEN.
Valve
B
A
5/32 x .31” Bolt
2 pc
Top First
Bottom Second
B
A
Underside view of
Side Table/Side Burner
Thermocouple wire not
shown for clarity
C
Side Burner Valve
Brass Thremocouple Nut
DO NOT OVER TIGHTEN