Weber Built-In LP Gas Grill Gas Grill User Manual


 
26
WWW.WEBER.COM
®
A
B
C
D
E
i
ii
iii
iv
v
CONNECT GAS SUPPLY
A 58 inch (1,473.2 mm) corrugated gas line is supplied with the grill. This line needs to
pass through the gas inlet opening to the main gas supply.
1) Connect the corrugated gas line to the manifold located on the right hand side of grill
under the control panel. Use the 1/2” fl ared gasket (1) to ensure proper seal.
Note: 1/2” fl ared gaskets are included in the Summit
®
Built-In tank cabinet (#21280) or
included with your grill .
The corrugated line passes through the “Island Structure” cavity to the regulator
connection inside the Summit
®
Built-In tank cabinet (#21280) or the hose and regulator
connection inside the tank enclosure. (Shown below)
2) Uncap one fl are fi tting from the 90º Connection located inside the Summit
®
Built-In
Tank Enclosure.
3) Use the 1/2 inch fl ared gasket to ensure proper seal.
NOTE: Only use the 3/8 inch (12.7 mm) fl ared gasket if you are installing the optional
side burner.
4) Connect the corrugated gas line to the 90º Connection.
CONNECTION CHART
A
Top View
B
Typical tank cabinet or tank enclosure location
C
Side View
D
Top of Box
E
Back of Box
i
Corrugated Gas Line to Manifold
ii
90° fi tting
iii
Use Bushing for Gas Line Hole
iv
1/2” (12.7 mm) Flared Gasket
v
Cap (Optional Side Burner)
GAS SUPPLY