Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
24
IGNITION SYSTEM OPERATIONS
If the ignition system fails to ignite the burners, then check the igniter.
• Check that both ignition wires are attached properly to igniter electrodes(1).
• Check that the ignition button pushes in, and returns to the out position.
If the ignition system still fails to light, contact the Customer Service
Representative in your area using the contact information on our web site. Log
onto www.weber.com
®
.
Maintenance
(1)
(1)
(a)
(b)
REPLACING MAIN BURNERS
1) Your Weber
®
gas barbecue must be OFF and cool.
2) Turn gas OFF at source.
3) Open lid and remove the cooking grates.
4) Remove nut and washer on Outside burner and Inside burner.
5) Rotate the outside burner 90º. Slide and lift burner away from burner orifi ce and
remove from cook box.
6) Repeat this procedure for the Inside burner.
ƽ CAUTION: Care must be taken when removing or
reinstalling burner tubes. Do not force or bend the gas lines
that connect the burner tubes to the control valve.
7) To reinstall the burners, reverse 4) through 7).
ƽ CAUTION: The burner openings(a) must be positioned
properly over the burner orifi ces(b).
Check for proper assembly before fastening Burner tubes in place.
ƽ WARNING: After reinstalling the burners, the gas
connections should be leak checked with a soap and water
solution before using the barbecue. (See Step: “Check for
gas leaks.”)