Weber 3400 LP Gas Grill User Manual


 
16
CHECK FOR GAS LEAKS
WARNING: Do not ignite burners while checking
for leaks.
Check for leaks by wetting the connections with the soap
and water solution and watching for bubbles. If bubbles
form or if a bubble grows there is a leak.
Check:
a) Hose to manifold connection. Figure 30 (a).
WARNING: If there is a leak at connection a, retighten
the fitting with a wrench and recheck for leaks with
soap and water solution.
If a leak persists after retightening the fitting, turn
OFF the gas. DO NOT OPERATE THE BARBECUE.
Contact Weber-Stephen Customer Service.
b) Regulator to tank connection. Figure 30 (b).
c) Manifold to side burner hose connection.
Figure 30 (c).
d) Valves to manifold connections. Figure 30 (d).
e) Side burner hose to side burner valve, and side
burner supply line to side burner valve. Figure 30 (e).
f) Side burner supply line to side burner orifice
connection. Figure 30 (f).
g) Hose to regulator connection. Figure 30 (g).
WARNING: If there is a leak at connections
b, c, d, e, f or g, turn OFF the gas. DO NOT OPERATE
THE BARBECUE. Contact Weber-Stephen
Customer Service.
When leak checks are complete, turn gas supply OFF at
the source and rinse connections with water.
Figure 30
(a) (b)
(c)
(g)
(e)
(d)
views from
below
(f)