Swisher FC-10 Outdoor Cart User Manual


 
Pre-Assembly Instructions
For easy assembly, follow all directions step by step.
Open all boxes before beginning to assemble. Approximate assembly time is: 1.5 to 3 hours
Helpful TIP: Read all instructions before starting to assemble cart.
Check Parts and Hardware:
Group together and check that all hardware and parts are include
d. Refer to listing and illustration below. If
you are missing parts please call Swisher Customer Service 1-800-222-8183 for assistance.
Tools Required:
Tape Measure
Flat Head Screwdriver (large size)
Standard Pliers
Two 10mm combination or ratchet style wrenches
Two 13 mm combination or ratchet style wrenches
Part Number Listing
Ref # Part # Description Qty
1 12166 Bottom Panel 2
2 12167 Front Cross Brace 1
3 12168 Tongue Support 1
4 12169 Wheel Axle Support 2
5 12170 Axle 1
6 12171 Wheel / Tire Assembly 2
7 12172 Latch Spring 1
8 12173 Latch Spacer 2
9 12174 Tongue Latch 1
10 12175 Hitch Tongue 1
11 12176 Hitch Pin Bracket 1
12 12177 Rear Cross Brace 1
13 12178 Rear Corner Bracket 2
14 12179 Side Panel 2
15 12180 Rear Corner Brace 2
16 12181 Front Panel 1
17 12182 Front Corner Brace 2
18 12183 Tailgate Latch 2
19 12184 Tailgate Pin 2
20 12185 Tailgate 1
Hardware
21 12186 M8 X 16 Truss Head Bolt 60
22 12187 M8 X 20 Truss Head Bolt 2
23 NB275 8mm Lock Washer 72
24 NB718 8mm Hex Nut 72
25 NB719 M8 X 20 Hex Head Bolt 10
26 NB195 20mm Flat Washer 2
27 NB603 3mm Cotter Pin 3
28 12188 12.5 X 64 Hitch Pin 1
29 12189 M6 X 90 Hex Head Bolt 1
30 12190 6mm Nylon Nut 1
31 NB600 6mm Hex Nut 2
32 NB274 Flat Washer 2
Page 3