Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
The Glide-out Grill
Using the grill
Open the grill door and pull the grill pan carriage
forward using the handle.
After placing your food on the grill grid, slide the grill
carriage into the grill chamber. Make sure it is pushed
right in.
The grill has two elements that allow either the whole
area of the pan to be heated or just the right hand
half.
To heat the whole grill, turn the knob clockwise.
To heat the right hand half turn it anticlockwise.
The neon indicator light by the grill control will come
on.
For best results preheat for 2 minutes with the grill
pan in position. After placing your food on the grill
pan grid, slide in the grill carriage. Adjust the heat to
suit by turning the knob.
Make sure the grill carriage is pushed right in.
The grill pan grid can be turned over to give two
grilling positions.
Don’t leave the grill on for more than a few moments,
without the grill pan underneath it.
For best results, especially with toast, preheat the
grill with the grill pan in the cooking position for two
minutes before use.
Before you remove any of the grill parts for cleaning
make sure that they are cool or use oven gloves.
The grill trivet can be removed and the food placed
on it while you are waiting for the grill to preheat.
The grill pan and grill pan carriage can be easily
removed for cleaning. See the ‘Cleaning your cooker’
section of these instructions.
When you pull the grill pan forward is the wide rim at
the front? It’s important that the wider part is at the
front.