Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
OPERATING INSTRUCTIONS
WARNING:
ELECTRICAL GROUNDING
INSTRUCTIONS: This appliance (rotisserie
motor) is equipped with a plug and should be
plugged directly into a properly grounded
receptacle. DO NOT cut or remove the
grounding prong from this plug.
Keep the rotisserie motor electric
cord away from the heated surfaces
of the grill. When not in use remove
and store the motor in a dry location.
GRILL LIGHTING INSTRUCTIONS
WARNING: IMPORTANT!
BEFORE LIGHTING…
Inspect the gas supply hose prior to turning
the gas “ON”. If there is evidence of cuts,
wear, or abrasion, it must be replaced prior to
use. Do not use the grill if the odor of gas is
present. Only the pressure regulator and hose
assembly supplied with the unit should be
used. Never substitute regulators for those
supplied with the grill. If a replacement is
necessary, contact the factory for proper
replacement.
Screw the regulator (type QCC1) onto the tank.
Leak check the hose and regulator connections
with a soap and water solution before
operating the grill.
TO LIGHT THE GRILL BURNER:
Make sure all knobs are “OFF” then turn on the
gas supply from the LP tank. Always keep your
face and body as far from the grill as possible
when lighting.
Your stainless steel grill has an exclusive
patented built-in ignition. The igniter is built in
to the valve. To ignite each burner simply push
and turn the control knobs to the HI setting, you
will hear the valve click as it sends a spark to
the pilot flame. If the burner does not light wait
5 minutes for any excess gas to dissipate and
then retry.
26