Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
W415-0638 / 04.24.08
7
1. Set base log onto burner ensuring stud and bracket fi t
into hole and notch. Base log should sit fl at on "Patiofl ame"
base.
FINISHING
LOG PLACEMENT / AGGREGATE
BASE
LOG
#1
#2
#3
#4
AGGREGATE
6. Patiofl ame is supplied with 3lbs of lava rock. All 3lbs can
be poured into outer ring. It may be mixed, or layered with
desired aggregate on top.
DO NOT PLACE AGGREGATE ONTO BURNER.
5. Place log #4 into notch on base and pocket on log #3.
4. Hook log #3 into notch on base log.
3. Place pocket on log #2 onto the locator on the base log.
2. Place "Y" end of log #1 into "Y" notch on the base log.
TANK RETAINING BRACKET
1. Fasten the bracket to the bottom of the propane bottle
using bolt and nut supplied. (Fig. 1)
2. Tighten the lag screw into the mounting surface leaving
approximately
1
/
4
” of thread above the surface.
3. Slide propane bottle into position so that the bracket
slides under the head of the lag screw. (Fig. 2)
4. Tighten the lag screw onto the bracket.
5. For fastening to a concrete surface a concrete anchor will
be required. (Not Supplied)
S
E
E
T
H
R
U
Fig. 1
Fig. 2