Kingsford 10040406 Charcoal Grill User Manual


  Open as PDF
of 8
 
9
6
Note: Attach both ends of lid handle before
fully tightening hex flange nuts.
STEP 6.
Attach lid handle (10) by inserting bolts (J)
through predrilled holes in handle. Slide
handle spacers (K) onto bolts then attach to
lid using aluminum flat washers (F) and hex
nuts (D) to secure.
Place heat insulation washers (I) on lid
hinges (H) as shown. Secure to grill base
using phillips head screws (A) and aluminum
flat washers (F).
Do not tighten screws all the way.
Cart grill base may need to be
adjusted during attachment.
STEP 5.
Attach cart grill base (2) to assembled cart
using phillips head screws (A) and aluminum
flat washers (F) as shown.
Tighten all screws.
STEP 12.
Slide assembled ash can (6) onto guides of
ash can spacer ring (8).
Place charcoal grate (18) with grate lifters
(22) attached inside cart grill base (2).
Rest cooking grate (17) on cart grill base.
STEP 11.
Hook bottom of grate lifter (22) to charcoal
grate (18).
TTOO UUSSEE::
Adjust charcoal grate to desired height and
let top of grate lifter rest on cooking grate
(17) as shown.
GRILL IS READY FOR USE.
2
A
F
A
F
F
F
A
A
H
2
I
D
F
K
J
10
22
17
18
17
8
22
22
18
2
6
 previous