Kenmore 415.1613511 Gas Grill User Manual


 
9
10
A
B
Grill head
Post
Regulator hose
Secure front brace in upper hole with one 1/4-20x1½” screw, 7mm lock washer and 7mm at washer,
shown A. Secure upper back panel in lower hole with one 1/4-20x1½” screw, 7mm lock washer and 7mm
Upper back
panel
1/4-20x1½” screw
7mm lock
washer
7mm lock
washer
7mm at
washer
7mm at
washer
1/4-20x1½” screw
Qty.4
7mm at washer
Qty.4
7mm lock washer
1/4-20x1½” screw
Qty.4
This step requires two people to lift and position grill head onto cart.
Carefully lower the grill head onto the cart, aligning slots at bottom of grill head with posts on cart side
Regulator hose must hang inside the cart. Grill head must face open side of cart.
Remove tie wrap holding regulator hose to bottom of grill head. Remove packing material. Loosen tie
wrap holding ignition wires to bottom of grill head. Retain tie wrap to bundle ignition wires together.
panels.
at washer, shown B.
Only left side shown; repeat above instructions for right side.
20 • 464224411