Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
31
3. Tighten the new orifice to the valve.
Make sure you are using the correct
orifice, marked “1.37”. (Fig. 7)
Rear Burner Conversion
1. Remove 5 screws (3/16-24 X 1/2 in.) at the back
of burner box to detach the rear burner cover
from the rear panel of burner box.
During this process, hold the rear burner
cover, otherwise, it will drop and may break,
possibly causing injury. (Fig. 8)
2. Use wrench to remove rear burner orifice
from the rear burner and the hose. (Fig. 9)
Rear burner
cover
Fig. 8
Rear burner
Hose
Orifice
Fig. 9
1.37
Fig. 7