Kenmore 148.1615621 Gas Grill User Manual


 
12
For your convenience, this grill comes equipped with a
UL approved transformer for outdoor use that provides
low voltage to power 10-watt grill light featured with this
model.
All wiring is factory connected except for the connection
that you must make: Connect the wire shown below to
the transformer.
Push the transformer power cord through the opening in
the grill cart rear panel as shown, and plug it into an
extension cord. To operate light, press the Main Light
switch on the control panel to ON or OFF.
Bulb Replacement
WARNING -TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV
RADIATION, OR INJURY TO PERSONS:
1. Lighted lamp is HOT. Turn off/unplug and allow
to cool before replacing bulb.
2. Bulb gets HOT quickly! Only contact switch/plug
when turning on.
3. Do not touch hot lens or bulb fixture.
4. Do not look directly at lighted bulb.
5. Keep bulb away from materials that may burn.
6. Use only with 10-watt or smaller bulbs.
7. Do not touch the bulb at any time. Use a soft
cloth. Oil from skin may damage bulb.
8. Do not operate the grill light with a missing or
damaged lens.
Transformer Connection Instruction
Power Cord
Keep any electrical supply cord away from any
heated surface.
Do not turn on the light when the hood is closed.
Connector
Transformer