Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Proper care and maintenance will keep your grill in
good operating condition and prolong its life. Follow
these cleaning procedures on a timely basis and your
grill will stay clean and operate with minimum effort.
CAUTION: Be sure your grill is off and cool before
cleaning, and always wear protective gloves when
cleaning your grill
Cleaning The Cooking Grates
Wash your cooking grates in a mild soap and
warm water solution. You can use a wash cloth,
vegetable brush, or brass bristled brush.
Never use any type of steel bristled brush. Dry
them when finished.
Cleaning the Heat Diffusers
Wash the heat diffusers periodically in a soap and
warm water solution. Use a vegetable brush to
remove stubborn burnt-on cooking residue. Dry the
heat diffusers thoroughly before you reinstall them
into the firebox.
Cleaning the Grease Tray and Pan
To reduce the chance of fire, the grease tray and
grease pan should be visually inspected before each
grill use. Remove any grease and wash both with a
mild soap and warm water solution,
Cleaning the Inside of the Grill Lid
Grease can have a tendency to build up on the inside
of the grill lid and could drip onto the deck or patio
when the lid is opened, Visually inspect the inside of
the grill lid before each grill use. Remove any grease
and wash with a mild soap and warm water solution.
Annual Cleaning of the Grill Interior
Burning-off excess food after every cookout will
keep it ready for instant use. We recommend you
periodically give the entire grill a thorough cleaning
to minimize your risk of grease fire and keep the grill
in good shape. Follow these steps:
1. Turn all burner valves to the "OFF" position.
2. Turn the LP gas tank valve to the "OFF"
position.
3. Disconnect the regulator assembly from the
gas tank. Inspect the hose for cracking, cuts or
any other damage, and replace as necessary.
Refer to the Parts List in this Operator's
Manual.
4. Remove and clean the cooking grates, heat
diffusers, warming rack, burners, and grease
tray.
5. Cover each gas valve orifice with aluminum
foil.
6. Brush the inside and bottom of the grill with a
fiber pad or nylon brush and wash with a mild
soap and warm water solution. Rinse
thoroughly and let dry.
7. Remove aluminum foil from orifices and check
each orifice for obstruction.
8. Replace the burners, ensuring the burners fit
down over each valve orifice.
25
9. Check and clean each electrode tip. Adjust the
spacing between the tips and the burner as
necessary. The space between the electrode
tip and burner should be approximately 3/16".
10. Replace the heat diffusers, grates, warming
rack, and grease tray.
11. Reconnect the gas source and observe the
burner flame for correct operation.
Cleaning Exterior Surfaces:
Cleaning Exterior Surfaces:
Wash with a mild dish soap and warm water
solution. A cloth, soft brush, or plastic cleaning
pad can be used. Rinse thoroughly and wipe
dry.
Cleaning Exterior Stainless Steel Surfaces:
Wash with a mild dish soap and warm water
solution. Clean and polish with a stainless steel
cleaner. There are many good quality stainless
steel cleaners and polishes available. Follow
the manufacturer's directions. Always polish in
the direction of the lines. Do not allow dirt and
grease to accumulate. Do not use steel wool as
it will scratch the surface. Do not use abrasive
cleaners and scrubbers.
CAUTION:
Heat, weathering, machine oils used in the
manufacturing of stainless steel, and dirt can all
cause exterior stainless steel surfaces to turn
tan in colon In addition, the following
products and naturally occurring substances in
the outdoors will damage all stainless steel
finishes. Use caution so they will not come in
contact with your grill. Immediately wash them
off and dry the stainless steel should they ever
come in contact with your gas grill. They
include, but are not limited to, pool chemicals
(chlorine and bromine), lawn fertilizer, ice
melting salts, sea or salt water, urine, bird
droppings, and tree sap.
Failure to comply with these instructions may
result in a hazardous situation which, if not
avoided, may result in injury.
Keep grill area clear and free from
combustible materials, gasoline and other
flammable vapors and liquids.
Do not obstruct the flow of air for combustion
and ventilation.
Keep the ventilation openings of the tank
enclosure cabinet free and clear of debris.