Kenmore 119.163018 Gas Grill User Manual


 
I,_.t :IF__I_I D][or__l:| din| _[,,.iII:| I[q IIn(o] _[,:
Grill Lighting Instructions
I Before each use, check all hoses for cracks,
nicks, cuts, or abrasions. If a hose is
damaged in any way, do not use your grill
before replacing the hose with an authorized
part from the Parts List. Also make sure all
gas supply connections are securely
tightened.
2. Familiarize yourself with the Safety and Use
and Care instructions in this manual. Do not
smoke while lighting the grill or checking gas
supply connections.
3. Be sure the LP gas tank has gas.
4. Open the grill lid.
Electric Igniter
Main Burner
Failure to replace a faulty hose, secure gas
supply connections, or to open the lid before
proceeding to the Lighting Procedures could
result in a fire or explosion that could cause
serious bodily injury, death, or property damage.
5. Set control knobs to OFF and open the LP
gas tank valve SLOWLY.
!ow
O
6. Push and turn any control knob to Hi
Q
Low
7. Immediately press the electronic igniter
button for 3-5 seconds to light the burner.
You should hear a clicking sound which
shows the electronic ignition is working. If
the burner does not light within 5 seconds,
turn the burner control knob to "OFF". Wait 5
minutes for the gas to clear, and repeat the
above procedure.
8. Once one burner is lit, the adjacent burner
can be lit by turning its control knob to Hi.
9. When lit, turn the control knob to its desired
setting.
Side Burner Lighting Instructions
1. Follow steps 1 through 4 of the Grill Lighting
Instructions.
2. Open the side burner cover.
3. Set control knobs to OFF and open the LP
gas tank valve SLOWLY
4. Push and turn the control knob to "Hi".
Immediately press the electric igniter button
for 3-5 seconds to light the burner. You
should hear a clicking sound which shows
the electronic ignition is working.
6,
If the burner does not light within 5 seconds,
turn the burner control knob to "OFF". Wait
5 minutes for the gas to clear, and repeat the
above procedure.
Side Burner
22