Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
!!
Remove Firebox from Cabinet
[] Unscrew and discard the 6 Phillips Head Bolts and Washers from the corner holes of the cabinet.
Remove the crossbar.
[] Carefully lift the cabinet up from the firebox and set on cardboard. Remove all foam packing from
cabinet.
[] Cut fastening straps on lid handle. Raise lid and remove and unpack parts inside firebox.
Crossbar
Install Control Knobs and Casters
[] Push the Control Knobs onto the valve stems. See Inset 1,
[] Place the Cabinet Assembly upside down and using 16 Phillips Head Bolts (M6x16mm) attach the 4
Casters to the Cabinet Assembly bottom. Use care to install each Caster into the correct position.
See Inset 2.
Inset 1
Phillips Head Bolt M6x16mm
qty: 16
r
Main Burner Control knob
qty: 3
Standard Caster
Swivel Caster
Locking Standard Caster
Inset 2
Locking Swivel Caster
lO