Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
– 7 –
Initial Seasoning
It is important to season this grill to provide a nonstick surface on the cast iron plates.
1. Using a clean, lint free cloth, wipe vegetable oil or shortening onto the upper and lower grill plates.
2. Turn the grill ON and set the temperature to 100°F.
3. After the red indicator light turns off, allow the grill to season for an additional 30 - 45 minutes.
4. Turn the grill OFF and allow the grill to cool. Wipe off the excess oil using a clean, lint free cloth.
5. Repeat steps 1 through 4, increasing the temperature by 100 F° each time, ending after the
400°F cycle.
The grill is now seasoned and ready for use.
CONTROLS (Fig. 2 )
Fig. 2
ON/OFF SWITCH - Press switch up to turn the grill ON.
- Press switch down to turn the grill OFF.
GREEN LIGHT - Lights when the grill is turned ON.
RED LIGHT - Light cycles with heating.
TEMP. CONTROL - Turn this knob to the desired temperature.
TIMER - Can be set for up to 5 minutes. Does not control power to grill.
PREHEATING
Turn on the grill (the green light will be lit) and turn the temperature control knob to the desired
temperature. The red light will stay on until the grill reaches the indicated temperature. The red light
will go out to indicate the grill has achieved the desired temperature. Allow 7 to 12 minutes for the
preheating process.
00
2
1
5
4
3
F
o
C
o
600 C
570 F
o
250 C
o
500 F
o
o
400 F
o
200 C
o
150 C
o
300 F
o
100 C
o
200 F
o
PL-53450
On/Off
Switch
Timer
Green
Light
Red
Light
Temp.
Control