GE Monogram Professional Outdoor Grills and Cooktop Gas Grill User Manual


 
13
REMOVE PACKAGING FROM CART MODELS
1. Cut the banding. Use a box cutter or utility knife to
score and cut the carton along the base (or remove
the staples with a staple remover or a screwdriver).
2. Lift the carton straight up and off of the grill.
Installation Preparation
4. Remove the parts packages on each side at the bottom.
5. Remove the screws from the hold-down board on the
right side of the skid to allow the appliance dolly to
slip under the wheels.
NOTE: When using an
appliance dolly, the
grill must be handled
and removed from the
right side. The right-
side wheels do not
rotate.
Hold-Down
Board
6. Open the lid. Cut plastic ties and bands.
Cut the banding
with tin snips.
Score and cut.
3. Remove all outside packing materials.
Parts
Package
Grill Grates
Parts
Package
7. The right-side shelf must be removed when using
an appliance dolly to lift the grill off the skid.
A. On the right side of the grill, remove the screw
from the back side of the shelf.
Holding Pin
B. Slide the shelf out of the holding pin at the front
end of the bracket.