Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
SIDE BURNER PARTS ASSEMBLY
Install grate over burner (See Fig. 23)
LEAK
TESTING
Make sure all burners are turned to “OFF”.
Turn on the gas at the cylinder (LP models) or main
valve (Natural models). DO NOT turn on the side
burner. Perform a leak test at all connections and
fittings by spraying a 50/50 solution of water and
soap. If any bubbles appear, correct the leak before
attempting to light the grill or side burner.
IGNIT
OR ASSEMBLY
1. The Battery, Spring and Ignitor cap must be
installed before using.
2. Install the battery, positive side first.
3. Slide spring assembly over battery.
4. Screw ignitor cap onto ignitor.
10
Fig. 23
Side Burner Assembly