Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Page 14
LIGHTING PARTS AND ASSEMBLY
5
Amber
Turn/Flasher
Red
Marker
Amber
Turn/Flasher
To Auger Light
INSTALLING THE LIGHT KIT
1. Start wiring the lights as shown in the drawing and the wiring
schematic. Secure the Light Harness (#6) to the frame using
nylon hose ties. Next Attach the lights to the fenders. With
the amber light to the outside of the grain cart and the side with
the amber and red light facing the rear of the grain cart, use
eight 1/4î x 1-1/4î hex bolts (#11) and eight 1/4î nylon insert
locknuts (#12) to attach the lights.
2. When connecting the wire harness (#6) to the front (male trac-
tor) plug (#5) follow the wire schematic as follows: Brown wire
to the Red braking marker lights, Yellow wire to the left turn-
ing marker light, Green wire to the right turning marker light,
and White wire to the ground. Proceed wiring the lights as
shown in the drawing and the wiring schematic.
6
Plug pin location may vary
depending on tractor.
(Left)
Yellow Band
(Right)
Green Band
REF. PART
NO. NO. QTY. DESCRIPTION
*#7 (09437) includes item #ís 2,4, & 9 along with the light and mount
Please order replacement part by PART NO. and DESCRIPTION.
Painted Parts are available in Red or Green. Add -10 behind the
part number for red and -20 behind the part number for green.
1
10
9
2
11
4
7
11
11
11
12
12
3
1
13
13
1. 07278 2 Conspicuity Tape
2. 06925 1 5/16î x 1î Carriage Bolt
3. 10032 1 Left Dual Ag Light
--. 10033 1 Right Dual Ag Light
4. 02103 1 5/16 x 2î Hex Head Bolt
5. 07416 1 7-Way Male Plug Connector
6. 10608 1 Wiring Harness
*7. 09437 1 Auger Light Kit W/Two Prong Connector
8.
9. 00036 2 5/16î Spring Lockwasher
10. 00007 2 5/16î Hex Nut
11. 00336 8 1/4î 1-1/4î Hex Head Bolt
12. 00062 8 1/4î Nylon Insert Locknut
13. 04508 4 Amber Reflective Sticker
--. 04804 4 Red Reflective Sticker
BROWN
OR
BLACK
(TAILLIGHT)
GREEN
(RIGHT
BLINKER)
GRAIN CART
WIRING DIAGRAM
FRONT OF PLUG
YELLOW
(LEFT BLINKER)
RED
(AUGER LIGHT)
WHITE
(GROUND)
HOT
NOTE: Connect the wires to the tractor plug in, make sure all lights are
in correct working order. When working correctly behind a tractor, the
amber lights are the flashing warning lights and the turn signals.