DCS BGB36 Gas Grill User Manual


 
31
COOKING ON ROTISSERIE
1. Place prepared rod into motor, lay across to other side in groove (Fig.42).
2. Verify placement as shown in Fig. 43.
3. Ignite burner, start rotisserie motor, and keep on rotisserie valve on “high” for cooking all meats on the rotisserie.
4. To check temperature of the meat, turn off motor, turn temperature to low while using your instant-read ther-
mometer. For poultry it should read 75
o
C in the breast. Thermometer should touch the breastbone, then lift up 2
cm from the bone to get a more accurate temperature reading. Remove thermometer and turn on motor, return
heat to high if more cooking is needed. Repeat above instructions (Fig. 44).
5. When you have finished using the rotisserie, turn off motor and turn the rotisserie knob to “OFF”. If you have fin-
ished using the appliance altogether, turn the main gas supply off too.
6. Remove the rod, using oven mitts, place meat or poultry on broiler pan, then remove prongs (Fig. 45).
WARNING!
The fork rods are very sharp. Keep hands away from tips when removing the food.
7. Cover with foil for a 15 to 20 minute waiting time. Meat will carve better and juices will go back into the meat.
FIG. 42
FIG. 43
USING THE ROTISSERIE
FIG. 44
FIG. 45