Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
15
Assembly Step 11
Tools needed:
Locate these parts:
Zip Tie
Hardware Bag
G
S-Hook
Pliers
Using the zip tie, secure the hose to the front
leg as shown. Do not pull the zip tie tight -
leave it just loose enough so the hose can be
adjusted if needed.
Tying the hose to the leg helps prevent the
hose from coming into contact with the hot
burner chamber. Inspect the installation
underneath the smoker to ensure the hose is
not rubbing any position of the burner cham-
ber.
Crimp
OR
1. Place one end of the S-hook around the
regulator neck or through the eyelet as
shown.
2. Using a set of pliers, crimp the S-
hook securely to the HVR so it
can not be removed from the
HVR.
3. When the LP tank is not at
-
tached to the smoker, use the
S-hook to hang the HVR from
the carry handle on the side
of the smoker. This will help
prevent dirt and other par-
ticles from plugging the end
of the HVR.
Assembly is now complete! Please follow all instructions and safeguards
on the following pages for connecting the LP tank.