Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
USE AND CARE CON’T.
Figure C
With proper assembly, the gas hose cannot be removed without
pushing the quick disconnect sleeve back.
Please Note: Hose and assembly are C.S.A. listed for natural
gas, manufactured gas, mixed gas and for liquefied petroleum
and for LP Gas-Air mixtures on basis of 0.64 specific gravity for
1000 BTU’s per cubic foot of gas at 0.3 in. water column
pressure drop. Only ANSI Z21.54 approved hoses should be used
with this grill.
To disconnect, push
sleeve back and pull plug out of sleeve (this automatically shuts
off gas).
The appliance and its individual shut off valve must be
disconnected from the gas supply piping system during any
pressure testing on that system at test pressures in excess of 1/2
psig (3.5kPa).
The appliance must be isolated from the gas supply piping
system by closing its individual manual shutoff valve during any
pressure testing of the gas supply piping system at test pressures
equal to or less than 1/2 psi (3.5kPa).
4
PARTS LIST
Key Qty. Description Part No.
Note: Illustrations are not to scale.
A
CD
E
1.45mm
Red Dot
B
A 6 Main & Sideburner Natural Gas Bezel (Large Bezel) 3499856
B 1 Rotisserie Burner Natural Gas Bezel (Small Bezel) 3498841
C 1 Orifice Driving Tool 80004378
D 1 10 ft., 3/8” Natural Gas Hose 3496263
E 1 Rotisserie Burner Natural Gas Orifice (Red Dot-1.45MM) 80007768
F 3 Main Burner Natural Gas Orifice (Blue Dot-#57) 3498451
G 1 Searing Burner Natural Gas Orifice (Green Dot-1.65MM) 3498837
H 2 Sideburner & Rotisserie Burner Natural Gas Orifice (Yellow Dot-#53) 3499765
Tools required for assembly:
Orifice Driving Tool - Provided
Adjustable Wrench - Not Provided
Standard #2 Phillips Screwdriver - Not Provided
NOTE: Magnetic tip screwdrivers are recommended, but not required.
Hi
Low
OFF
Med
Hi
Low
OFF
Med
F
#57
Blue Dot
G
1.65mm
Green Dot
H
#53
Yellow Dot