Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Return Sideburner to Shelf. Make sure Burner engages Sideburner Valve. See illustration below for correct burner-to-valve
engagement.
Secure Burner to Shelf with two Washers and two Screws.
Reconnect Ignitor wire to Electrode.
Place Sideburner Grate onto Sideburner Pan.
G4
Valve
Sideburner
CORRECT BURNER-TO-VALVE
ENGAGEMENT
Section G Con’t.
Reinstall Heat Diffusers, Cooking Grates and Warming Rack, reference illustration Section A1. for reinstallation.
TROUBLESHOOTING
EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department.
Emergencies
Gas leaking from
cracked/cut/burned
hose.
Possible Cause
• Damaged hose.
Prevention/Solution
• Turn off gas at at source. If anything but burned, replace
parts. If burned, discontinue use of product until a plumber
has investigated cause and corrections are made.
Prevention/Solution
• Make sure gas hose is properly connected to grill. If hose is
properly connected, make sure gas source is turned on.
Troubleshooting
Possible Cause
• No gas flow.
Problem
Burner(s) will not
light using ignitor.
GAS ISSUES:
Burner(s) will not
match light.
Flames blow out.
• See
• Match will not reach.
• Improper method of match-lighting.
• Natural gas valve not fully open.
• Inadequate gas pressure.
“GAS ISSUES:” .
• Use long-stem match (fireplace match).
• See “Match-Lighting” section of Grill Use and Care.
• Open Natural Gas Valve to full open position.
• Call gas company.
TROUBLESHOOTING
EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department.
Emergencies
Gas leaking from
cracked/cut/burned
hose.
Possible Cause
• Damaged hose.
Prevention/Solution
• Turn off gas at at source. If anything but burned, replace
parts. If burned, discontinue use of product until a plumber
has investigated cause and corrections are made.
Prevention/Solution
• Make sure gas hose is properly connected to grill. If hose is
properly connected, make sure gas source is turned on.
Troubleshooting
Possible Cause
• No gas flow.
Problem
Burner(s) will not
light using ignitor.
GAS ISSUES:
Burner(s) will not
match light.
Flames blow out.
• See
• Match will not reach.
• Improper method of match-lighting.
• Natural gas valve not fully open.
• Inadequate gas pressure.
“GAS ISSUES:” .
• Use long-stem match (fireplace match).
• See “Match-Lighting” section of Grill Use and Care.
• Open Natural Gas Valve to full open position.
• Call gas company.
22
Sideburner Grate
Sideburner
Washers
Screws
Electrode