Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Items to Assemble:
1 Lid Handle
2 Machine Screw
2 Lock Nuts (#10-24) (keps)
1 Temperature Gauge w/Wing Nut
Items to Assemble:
3 Lid Hangers
3 #12-14x1/2” Self-tap Screw
A Attach lid handle to lid with machine screws and hex nuts.
Tighten the screws not the hex nuts.
B Remove wing nut from thermometer. Place thermometer into
lid and reattach the wing nut
A Attach lid hangers inside of lid with self-tap screw as shown..
Wing Nut
#10-24
Lock Nut
Qty: 2
#10-24x1”
Machine Screw
Qty: 2
A
A
B
10
11
Self-tapScrew
#12-14x1/2”
Qty: 3
Hang lid on side of grill bottom
from lid hangers.
Lid Handle
Temperature
Gauge
Lid Hangers
Lock Nuts
Items to Assemble
1 LP Tank
DANGER
• Never fill the cylinder beyond 80% full. An overfilled
LP tank is hazardous due to possible gas released
from the safety relief valve.
• The safety relief valve on the LP tank could activate
releasing gas and cause an intense fire with risk of
property damage, serious injury or death.
• NEVER store a spare LP tank under or near grill or
in enclosed areas.
• If you see, smell or hear escaping gas, immediately
get away from the LP tank/grill and call your fire
department.
• All spare LP tanks must have safety caps installed
on the LP tank outlet.
CAUTIONCAUTION
• Failure to install tank correctly may allow gas hose
to be damaged in operation.
A
12
s LP tank should be filled at this time.
A Place LP tank onto base as shown. Tighten thumbscrew to
hold tank in position.
14 • 06601295