Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly
Page 7
Step 15: Install the Internal Components
Parts Required:
Note:
Caution:
VCS4006, : (4) Sear Plates
VCS4106 (3) Cooking Grates
(1) Warming Rack
VCS5006, : (5) Sear Plates
VCS5016 (4) Cooking Grates
(1) Warming Rack
Model VCS4106 requires a “AAA” Battery;
Models , VCS5006 &VCS5016 require a “AA”
Battery.
Unscrew the Ignition Button from the console and insert
a battery into the housing by placing the positive side of
the battery in first. Then screw the Ignition button back
into the console.
Carefully place each of the Sear plates side by side inside
the barbecue, making sure the semicircular finger groove
is facing toward the front of the grill. Each sear plate
rests just above each burner tube.
Next, set the cooking grates, side by side, on the upper
ledge of the grill tub. Make sure the finger groove is
facing toward the front of the grill.
Set the warming rack into the supports located on either
side of the rear lid.
One side of the Grate surface has a rounded side
suitable for meats and a flat side suitable for delicate
foods (i.e. fish). Grates can be turned over according to
your preference.
Do not attempt to turn Cooking Grate over
while the Grill is in use and grates are hot. Doing so
could result in severe burns and other injuries.
Step 16: Install the Battery
Note:
VC4006
Fig. 15b
Warming
Rack
Cooking
Grates
Sear Plate
Burner
Fig. 15a
Fig. 16