Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly
Page 5
Step 9: Attach Side Burner Lid
Parts Required:
Note:
Step 10: Attach Knobs
Parts Required:
Note:
(S/B-Single)
(1) Side Burner Lid (S/B-Single)
(2) #10-24 x 3/4” ( 1/4” Shank)*
*
Attach the lid marked (S/B-Single) to the Shelf Right top
marked VM-S/B using two #10-24 x 3/4” ( 1/4” Shank)
bolts. Align the holes at the back sides of the lid with the
holes located in the shelf top and insert a bolt in each.
If your unit is equipped with a side burner, please
refer to the instruction sheet included with the side
burner for installation instructions.
Depending upon your specific model, your grill
may require 4, 5 or 6 knobs. is equipped with
four (4) knobs, VCS4006 with five (5), and &
equipped with six (6) knobs.
Align the knobs on the valve stems and push inward until
the knob sits snugly on the stem.
Included with the Side Burner Kit
VCS4006: (5) Knobs
VCS4106: (4) Knobs
VCS5006: (6) Knobs
VCS5016: (6) Knobs
VCS4106
VCS5006
VCS5016
Remove the Packing Tape from:
The Grease Cup
The Base Assembly (inside the grill)
The Warming Rack
For models VCS5006 & VCS5016, remove the
Packing Tape from the front pull-out drawer.
Step 11: Remove the Packing Tape
Note:
Fig. 9
Bolts
Fig. 10
Fig. 11