Cal Flame G4 Gas Grill User Manual


 
Safety Instructions
1
2009 G3, G4, G5 Grills
LTR20091050, Rev. A
www.calspas.com
Placement and Location
Cal Flame grills are designed for outdoor use only.
Never locate this appliance in an enclosed room, under a sealed
overhead structure, or in any type of enclosed area such as a
garage, shed, or breezeway. Keep clear of trees and shrubs.
Do not place this grill under or near windows or vents that can be
opened into your home.
Cal Flame grills are not intended for installation in or on recreational
vehicles or boats.
Maintain sufcient distance as to not overheat any overhead
combustible material such as a patio cover.
The area surrounding your new grill should be kept clean and free
from ammable liquids and other combustible materials such as
mops, rags or brooms, as well as solvents, cleaning uids, and
gasoline.
Do not use the grill or area surrounding the grill as a storage area
for ammable or plastic items. Do not store the liquid propane
(LP) cylinder in the vicinity of this or any other appliance when it
is not being used.
Set-Up
Before installing built in grills in enclosures, copy all pro duct
information such as model number, serial number and gas type
(LP) and store information in a safe place. This information is
located on a plate located behind the grill and is visible when the
hood is lowered or on the right side of the chassis. There is an area
on the back cover of this manual where you can write down this
information.
We recommend that a licensed contractor install your Cal Flame
grill. Installation must conform to local codes, or in the absence
of local codes, with either the National Fuel Gas Code, ANSI
Z223.1 / NFPA54, Natural Gas and Propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2),
as applicable.
To prevent re and smoke damage, remove all packaging material
before operating grill.
Safety Instructions
WARNING: Improper installation, adjustment, alteration,
service or maintenance can cause injury or property damage. Read
the installation, operating and maintenance instructions thoroughly
before installing or servicing this equipment.