Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Page 20 B101362-2-0610
Electrical Accessories
If an electrical accessory (e.g. rotisserie) is used on your grill, the
accessory must be electrically grounded in accordance with local
codes or, in the absence of local codes, with the National Electric
Code, ANSI/NFPA 70. In Canada, the electrical accessory must
be electrically grounded in accordance with the applicable section
of the current Canadian Electrical Code, CSA C22.1.
Any electrical accessory should be equipped with a three-prong
(grounding) plug, and plugged into a properly grounded three-prong
receptacle or wall outlet. Do not cut or remove the grounding
prong from the plug.
If an extension cord is required, use only a three-prong cord and
plug into a properly grounded receptacle as described above.
Do not expose an electrical accessory to water. Avoid using any
electrical accessory in wet weather as it may present a shock
hazard.
Keep any electrical cord and fuel supply hose away from all heated
surfaces.
Before Cooking
Before cooking on a grill for the rst time, it should be broken in
to burn off any oil residue from the manufacturing process.
1. Raise the grill lid.
2. Light grill burner.
3. Burn on HI for ten minutes.
4. Close the lid and burn on HI for an additional ten minutes.
5. Turn OFF gas. The grill is now ready for use.
Preheating
Before cooking on a gas grill, allow the grill to preheat on HI for
5 minutes with the lid closed.
This uses very little fuel and provides better avor.
Cooking
Broilmaster
®
is happy to provide a cookbook with each of its grills.
The cookbook contains helpful cooking tips and instructions as
well as great tasting recipes for preparing many delicious foods
on your grill.
OPERATION