Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Step 4
Attach tank support bracket to open
end of grill bottom frame using two
M6 X 35 bolts and M6 X 5 hex nuts.
NOTE: Securely tighten all bolts
at this time.
Step 5
Attach locking casters to bottom of
right straight legs and plain casters
to bottom of middle straight legs).
NOTE: Turn cart upside down for
easier assembly of
casters.
Step 6
Insert axle into one wheel hub, then
insert a wheel onto the axle (with
flat side of wheel facing out toward
wheel hub). Slide axle assembly
through holes in side burner legs.
Place second wheel on axle (with
flat side facing out toward wheel
hub) and push second wheel hub
into place.
Step 7
Add kitchen bottom shelf with door
stop toward front. Shelf should drop
over door pivot studs located on
kitchen bottom frame. Secure the
bottom shelf using two #8 X 3/8"
sheet metal screws.
Step 8
Attach upper grill frame and control
panel to side burner legs and
center legs using eight M6 X 35
bolts. Tank mounting bracket studs
should be on same side as the
side burner legs. Control panel will
mount over the open end of the
upper grill frame.
NOTE: Bolt must go through
control panel, then leg and
grill frame.
Wheel Hub
Tank Support Bracket
Locking Casters
21
Door Stop