Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5
Fit The Heat Reflectors
The reflectors fit between each burner. They
reflect heat from the burners, upwards to the
cooking surfaces.
The tabbed ends of the heat reflectors face
forward to the front of the barbecue frame. The
tabs fit into the slots in the front end of the
barbecue behind the control panel.
Fit The Burners
Remove the ‘R’-shaped retaining clips from
the burners.
Fit the burners, open end first, over the
stem of the control valves at the front
of the barbecue. Lower the other end
of the burner so the lug locates into the
corresponding hole at the rear of the
barbecue.
Replace the retaining clips into the burner
lugs so the burners stay in position.
Fit The Vaporizers
The Vaporizers are designed to vaporise fats
and juices from the meat. One Vaporizer is
fitted over each burner that is located under the
grill. The Vaporizers reduce flare-ups and help to
add that great barbecue flavour.
The tabbed ends of the Vaporizers face forward
to the front of the barbecue frame. The tabs fit
into the slots in the front end of the barbecue
behind the control panel. The Vaporizers should
be fitted to the same side of the barbecue as
the grate. They will not work if fitted under the
plate.
Assembly Of Main Barbecue