BeefEater Gas Barbecues Gas Grill User Manual


 
Australia’s Leading Barbecue
18
Beefeater Barbecues
Barbecue Width
Outdoor Installation Instructions
We recommend that this installation be done in a masonry
structure and carried out by a professional tradesperson. Other
non-combustible material such as Hardiplank, Villaboard with
metal studs may also be used.
This appliance must not be installed under or on any
combustible material. Minimum clearance from combustible
construction materials to all sides of the appliance is 450mm
(18”).
12
When using an LPG/Propane supply system in an enclosure, ventilation must be provided. Gas
vapour is highly explosive and can cause serious bodily injury or damage to property if allowed to
accumulate in a confined space and ignited.
WARNING: Contact your local municipality for any
building codes regulating the installation of outdoor
barbecue appliances. Outdoor installations must
conform to local codes or, in the absence of local codes,
with the following.
USA: National Fuel Gas Code, ANSI Z223.1/NFPA 54
CAN: B149.1 Natural Gas & Propane Installation Code.
AUST: Australian Standards Code AS: 5601
2 Burner 508mm
3 Burner 671mm
4 Burner 828mm
5 Burner 985mm
Typical Installation Drawing
230mm min
500mm min
20mm min rear
clearance
AGA approved
Propane regulator
(not included)
QCC LPG Cylinder
(not included)
Natural Gas Installation
AGA approved
Natural Gas
regulator
Shut off valve
(not included)
Stainless steel flex line or AGA approved
hose (not included)
Propane (LPG) Installation