BeefEater Gas Barbecues Gas Grill User Manual


 
Australia’s Leading Barbecue
BeefEater Barbecues
13
Operating Instructions
Operation Of The Optional Side Burner
Lighting
1. Check the control knob is in the Off position and ensure
the gas line is properly connected.
2. Raise the lid and check that the burner and burner cap
are in the correct position.
3. Press and turn the control knob slowly (3-4 seconds) in
a counter - clockwise direction to the High position until
a click is heard. When the burner is alight, select your
desired heat setting. A low flame or simmer condition
is obtained by turning the control knob anticlockwise to
Low.
4. If the burner fails to ignite, turn the control knob to Off,
wait 5 minutes and repeat the lighting procedure.
After Use
1. Turn the control knob to the Off position and turn the gas
cylinder valve off when the barbecue is not in use.
2. Clean off any food spills and then close the lid.
Warning
When using the side burner ensure that any handle fitted to
a wok, pot or pan is positioned so that it is out of reach of
children.
Warning - Safety With Woks And Pots
And Pans
When using a wok, pot or pan on the side burner ensure that
any handle is positioned so that it is out of reach of children.
Long handles protruding out beyond the side burner can be
dangerous.
Keep children away from the appliance when it is operating.
Never leave an operating barbecue unattended.
Low
High
Off
Long handles
protruding out
beyond the side
burner can be
dangerous.
Always open lid
before lighting.
Do not close lid
while burner is
alight.