Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5
Fit The Vaporizers
The Vaporizers are designed to vaporise fats and juices from
your food. The Vaporizers reduce flare-ups and help to add
that great barbecue flavour.
To install the Vaporizer(s), remove all plastic and/or cardboard
packaging material and place the Vaporizer into position on
the right hand side of the barbecue. The Vaporizers must be
fitted to the same side of the barbecue as the grill. They will
not work if fitted under the solid plate.
Set Up The Grease Tray
Assemble the grease tray as shown in the diagram
below. Attach the waste tray brackets to the grease
tray using the screws, nuts and washers provided.
Slide the smaller waste tray into place.
You may line the grease tray with a sheet of aluminium
foil if you wish. Remember to place a hole in the
centre so the grease can flow into the smaller waste
tray.
Fit The Cooking Plates And Grills
We recommend fitting the solid plate to the left-hand side of
the barbecue frame (with the drain hole to the extreme left).
The grills can be fitted to any side of the barbecue frame.
IMPORTANT: the grills must always be positioned over the
Vaporizers.
This appliance is designed to ventilate air through the
barbecue while it is operating. Do not fit additional cooking
plates to the top of the barbecue. Doing so will prevent the
unit from ventilating and will cause serious damage to the
barbecue.
Note: Vaporizer grid style may
vary between barbecues.
Assembly Instructions