Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
E-11
English
specications
All measurements are with 230V/50Hz mains power
Maximum continuous output power
All channels driven, 20Hz–20kHz, 8Ω 160W per channel; 1.05kW total
All channels driven, 20Hz–20kHz, 4Ω 270W per channel; 1.62kW total
One or two channels driven at 1kHz, 8Ω 170W per channel
One or two channels driven at 1kHz, 4Ω 290W per channel
Total harmonic distortion
At any level up to rated power, into 4Ω or 8Ω Typically <0.004% at 1kHz
Frequency response
Less than –0.3dB (10Hz—20kHz)
–3dB at 100kHz
Residual hum and noise
Ref. full power –108dB, 20Hz–20kHz, unweighted
Voltage gain
x 37 (31.5dB), Arcam standard
Input impedance
470pF in parallel with 22kΩ
General
Power requirements 115V or 230VAC, 50/60Hz, 1200W maximum via heavy
duty IEC C20 mains inlet (requires IEC C19 plug).
A so start system eliminates large inrush currents at
switch on.
Physical Dimensions: W430 x D450 x H180mm
Weight: 37.2kg net; 40kg packed
E&OE
NOTE: All specication values are typical unless otherwise stated
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
Radio interference
e P777 is an audio device which has been
designed to very high standards of electromagnetic
compatibility.
e unit can radiate RF (radio frequency) energy.
In some cases this can cause interference with FM
and AM radio reception. If this is the case, keep the
P777 and its connecting cables as far from the tuner
and its aerials as possible. Connecting the P777 and
the tuner to dierent mains sockets can also help to
reduce interference.
EC Countries – ese products have been designed
to comply with directive 89/336/EEC.
USA – ese products comply with FCC
requirements.