Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
B-4
(1)
(2)
Install manifold bracket
You will need: manifold bracket.
Hook the bracket(2) onto the manifold at the center
burner valve. Place your hand underneath the bracket.
Lift the manifold, bracket and cooking box slightly, then
hook the tab of the bracket onto the frame brace(1).
Install cylinder panel
You will need: Cylinder panel, two 1 3/4inch bolts, two
nylon cylinder glides, two nylon washers a 7/16 inch or
adjustable wrench and pliers.
Insert the cylinder panel tabs(1) into the slots in the
frame brace(2).
Slide the cylinder panel up until notch at bottom of
panel fits over the cross brace(1). Add nylon washer to
bolt and insert through the hole in the wheel frame at
the bottom right of the cylinder panel, make sure that
the bolt slips through the hole in the cylinder panel.
Add nylon cylinder glide to bolt end and tighten bolt
with the wrench, while holding the cylinder glide with
the pliers. Repeat procedure with the hole on the
bottom left side of the cylinder panel.
(1)
(2)
(1)