Weber Q 300 Gas Grill User Manual


  Open as PDF
of 56
 
17
Gas Instructions
(A)
(B)
(C)
(D)
(E)
ƽDANGER
Do not use an open fl ame to check for gas leaks. Be sure
there are no sparks or open fl ames in the area while you
check for leaks. Sparks or open fl ames will result in a fi re or
explosion, which can cause serious bodily injury or death
and damage to property.
1) Mix soap and water.
2) Turn on the cylinder valve by turning cylinder valve handwheel counter-clockwise.
3) Check for leaks by wetting the fi tting with the soap and water solution and
watching for bubbles. If bubbles form, or if a bubble grows, there is a leak.
If there is a leak, turn off the gas and tighten the fi tting. Turn the gas back on and
recheck with the soap and water solution.
If leak does not stop, Contact the Customer Service Representative in your area using
the contact information on our web site. Log onto www.weber.com
®
. Do not use the
barbecue.
4) When leak checking is complete, turn gas supply OFF at the source and rinse
connections with water.
ƽ WARNING: Do not ignite burners when leak checking.
Check:
A.) Valve to-regulator hose connection.
B.) Valve to Outside burner gas line connection.
C.) Valve to Inside burner gas line connection.
ƽ WARNING: If there is a leak at connection (A, B, or C)
turn OFF the gas. DO NOT OPERATE THE GRILL. Contact
the Customer Service Representative in your area using the
contact information on our web site. Log onto www.weber.
com
®
.
Check:
D.) Hose to regulator connection.
E.) Regulator to propane cylinder connection.
ƽ WARNING: If there is a leak at connection (E), remove
propane cylinder. Do not operate grill. Use a different propane
cylinder and recheck for leaks with soap and water solution. If
a leak persists after retightening the propane cylinder, turn OFF
the gas. DO NOT OPERATE THE GRILL. Contact the Customer
Service Representative in your area using the contact
information on our web site. Log onto www.weber.com
®
.
 previous next