Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
16
CONNECTING THE LIQUID PROPANE CYLINDER
ƽ WARNING: Make sure that the LP cylinder valve is closed.
Close by turning valve clockwise.
ƽ DANGER
Do not use an open fl ame to check for gas leaks. Be sure
there are no sparks or open fl ames in the area while you
check for leaks. Sparks or fl ames will result in a fi re or
explosion which can cause serious bodily injury or death,
and damage to property.
To Connect the hose to the cylinder:
ƽ WARNING: The hose must be secured to the cart leg by the
hose retention clip. Failure to do so could cause damage
to hose resulting in a fi re or explosion, which can cause
serious bodily injury or death and damage to property.
1) Remove the plastic dust cover from the tank valve.
2) Screw the hose coupling onto the tank valve, clockwise, or to the right. Hand-
tighten only.
Note: This is a new type of connection. It tightens clockwise and will not allow gas to
fl ow unless the connection is tight. The connection requires tightening by hand only.
ƽ WARNING: Do not use a wrench to tighten the connection.
Using a wrench could damage the regulator coupling and
could cause a leak.
CHECK FOR GAS LEAKS
CHECK THAT THE BURNER VALVES ARE OFF
Check by pushing the control knob in and turning clockwise. Confi rm that the knob is set
in the “OFF” indicator position. Proceed to the next step. If the control knob does turn,
continue turning clockwise until it stops. It is now in the OFF position. Proceed to the
next step
ƽ WARNING: You should check for gas leaks every time you
disconnect and reconnect a gas fi tting.
ƽ WARNING: Perform these leak checks even if your
barbecue was dealer or store assembled.
ƽ WARNING: Do not ignite burners when leak checking.
Gas Instructions