Weber 89962 Gas Grill User Manual


  Open as PDF
of 68
 
22
3
1
1
2
1
2
3
1
maINTENaNcE
4
5
SIDE BURNER MAINTENANCE
m WARNING: All gas controls and supply valves should be in
the OFF position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding clip.
Spark should be a white/blue color, not yellow.
A) Igniter Wire (1)
B) Ground wire (2)
C) Burner (3)
m WARNING: The side burner orifice (4) must be parallel to the
side burner tube opening (5).
◆
Side Burner Grate
Head Retention Clip
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter Button
ELECTRONIC CROSSOVER
®
IGNITION SYSTEM OPERATIONS
If the Electronic Crossover
®
Ignition System fails to ignite the BURNER 1, light BURNER
1 with a match. If BURNER 1 lights with a match, then check the Electronic Ignition.
• Checkthatbothoftheignitionwiresareattachedattheignitermoduleproperly.
• CheckthattheElectronicIgnitionbuttonisworkingbylisteningandlookingforsparks
at BURNER 1.
Replace Battery If Necessary
AAA alkaline battery only.
If the Electronic Crossover
®
Ignition System still fails to light, contact the
Customer Service Representative in your area using the contact information on
our web site. Log onto www.weber.com
®
.
◆
 previous next