Weber 54406 Gas Grill User Manual


  Open as PDF
of 120
 
24
mAINTeNANce
ELECTRONIC IGNITION SYSTEM OPERATIONS
If the Electronic Ignition System fails to ignite, be sure there is gas flow by attempting to
match light your burners. Refer to “MAIN BURNER MANUAL IGNITION”. If match lighting
is successful, the problem lies is the electronic ignition.
m WARNING: All gas controls and supply valves should be in
the OFF position.
• VerifythattheAAbattery(alkalineonly)isingoodconditionandinstalledcorrectly
(1). Some batteries have a plastic protective wrap around them. This plastic must be
removed. Do not confuse this plastic with the battery label.
• Makesuretheignitionwiresareattachedtoignitermoduleproperly.Refertothe
“IGNITER MODULE WIRE GUIDE” below.
• Makesuretheceramicigniterassemblyisfullypositionedintoburnertubeigniter
channel (2). If properly positioned, you will hear a snap (3).
• MakesuretheElectronicIgnitionbuttonisworkingbylisteningandlookingforsparks
at burner.
If the Electronic Ignition System still fails to light, contact the Customer Service
Representative in your area using the contact information on our web site. Log
onto www.weber.com
®
.
◆
IGNITeR moDULe WIRe GUIDe 330
1
2
3
4
1
2
34
A BCD
Wire End & Terminal Color Burner Tube
Black (1) Left Burner (A)
Yellow (2) Right Burner (B)
Blue (3) Center Burner (C)
Green (4) Sear Burner (D)
2
3
1
 previous next